Johns Creek Fire Protection Company
Fire Sprinkler Estimates Fire Sprinkler Installations Fire Sprinkler Repairs Fire Sprinkler Tests and Inspections

Johns Creek Flow Tests

Fire Hydrant Flow Tests | HydroFlow Products

Flow tests are conducted on installed fire protection and sprinkler systems to ensure the adequate pressure and available flow of extinguishing agents through the enclosed plumbing system.

Flow tests can be accomplished by an actively licensed fire sprinkler company in Johns Creek testing the flow of water (gallons per minute) discharged from the installed fire sprinkler systems outlets and orifices to ensure an adequate supply of extinguishing agent available and by reading measurements from gauges on valves, fire pumps, risers, standpipe and fire sprinkler systems to check the systems pressure (PSI) of extinguishing agent, water or air that’s required for the fire sprinkler system to operate and function.

Discharge outlets and orifices may include sprinkler heads, fire department and fire hose connections (FDC outlets), fire hydrants, water misting systems, early suppression fast response (ESFR) fire sprinkler systems.

Fire pumps discharge bypass, dry pipe, pre action or quick opening sprinkler systems should have complete full flow tests as described in safety, building and fire codes in Johns Creek and in NFPA standards and codes.

Fire Hydrant Flow Tests

NFPA 291 Recommended Practice for Fire Flow Testing and Marking of Hydrants can be referred to for schedules to flow testing on fire hydrant systems to help ensure operation, function and readiness of all installed fire hydrants.

Fire Sprinkler Tests and Inspections

NFPA 25 Fire Protection Equipment Testing Recommendations and Frequencies are standards and codes created by the National Fire Protection Association to help maintain and service fire protection systems and installed fire sprinklers.

All installed fire sprinkler systems should be tested and inspected per their described schedule according to Federal, State, OSHA, Insurance Companies, NFPA Standard and Codes and any additional requirements or fire codes the City of Johns Creek may enforce. Tests and inspections should be completed by actively licensed fire sprinkler companies in Johns Creek and their technicians and personnel. Certificates may be issued by a fire sprinkler company verifying the installed fire sprinkler system is operational and in a state of readiness upon successful completion of monthly, quarterly (4mo), semi-annual (6mo), annual (1yr), three (3yr), five year (5yr) tests and inspections.

Johns Creek Fire Sprinkler Company

To comply with fire codes, when installing new fire sprinkler systems or equipment, servicing and maintaining existing installed fire sprinkler systems or addressing safety and/or fire code violations from the City of Johns Creek you'll want affordable, experienced, dependable and reliable help to perform the fire sprinkler services required.

Protect your interests check to ensure the fire sprinkler company is properly and actively licensed to perform the duties required for the specific fire protection system. As each fire protection system may require independent licenses to perform service, repair or installation on fire sprinklers, fire extinguishers, fire suppression systems, fire alarms or fire hydrants in the City of Johns Creek.

 

Fire Sprinkler Systems

Johns Creek Fire Sprinklers

Fire Sprinkler Services
Johns Creek, Georgia

All installed fire sprinkler systems may require service, maintenance, tests and inspections performed to ensure the system will be readily available for operation in case of an emergency. Any fire sprinkler service should be performed by an actively licensed fire sprinkler company in Johns Creek.

Johns Creek
Fire Sprinkler Services

Fire Sprinkler Costs
Obtain an Estimate
Bid for Service
Designing a System
Engineering
Installation
Maintenance
Service
Repair
Troubleshooting
Tests
Inspections
Annual Tests & Inspections
5 Year Tests & Inspections
Hydrostatic Tests
Flow Tests

NFPA 13
The NFPA standard and codes for the Installation of Sprinkler Systems

NFPA 14
The NFPA standard and codes for the Installation of Standpipe and Hose Systems

NFPA 15
The NFPA standard and codes for Water Spray Fixed Systems for Fire Protection

NFPA 16
The NFPA standard and codes for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems

NFPA 20
The NFPA standard and codes for the Installation of Stationary Pumps for Fire Protection

NFPA 25
The NFPA standard and codes for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems

Fire Sprinkler Systems

Fire sprinkler systems are designed to immediately initiate the flow of water, water mist, dry chemical, carbon dioxide (CO2) or similar gas discharge from sprinkler heads in effort to immediately extinguish and/or prevent the fire from spreading.