Abilene Fire Protection Company
Fire Sprinkler Estimates Fire Sprinkler Installations Fire Sprinkler Repairs Fire Sprinkler Tests and Inspections

NFPA 20
Standard for the Installation of Stationary Pumps for Fire Protection

Many local governments have adopted NFPA standards and codes. Safety, building and fire code enforcement inspectors in Abilene may make reference to which standards and codes are violated if your installed fire sprinkler system is malfunctioning, inoperable or failing tests.

If you receive a violation from safety, building and/or fire code enforcement officers contact an actively licensed fire sprinkler company in Abilene to immediately correct, repair, replace and remedy the violations received. You may receive a certificate to certify that your fire sprinkler system is fully operational and in a state of readiness upon completion of any services performed.

NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection

“1.1* Scope. 1.1.1 This standard deals with the selection and installation of pumps supplying liquid for private fire protection. 1.1.2 The scope of this document shall include liquid supplies; suction, discharge, and auxiliary equipment; power supplies, including power supply arrangements; electric drive and control; diesel engine drive and control; steam turbine drive and control; and acceptance tests and operation. 1.1.3 This standard does not cover system liquid supply capacity and pressure requirements, nor does it cover requirements for periodic inspection, testing, and maintenance of fire pump systems. 1.1.4 This standard does not cover the requirements for installation wiring of fire pump units.”

NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection

About the National Fire Protection Association (NFPA)

A group of insurance firms originally created the National Fire Protection Agency (NFPA) in the late 1800's for the purpose of creating building standards in the emerging fire sprinkler industry.

The goal in creating these standards and codes was to aid fire sprinkler installers with specific guidelines created from the study of fire departments, fire sprinkler companies and manufacturers. These standards and codes have been adopted by many local governments and around the World for the installation, maintenance and service of installed fire sprinkler systems.

Fire Sprinkler Systems

Abilene Fire Sprinklers

Fire Sprinkler Services
Abilene, Texas

All installed fire sprinkler systems may require service, maintenance, tests and inspections performed to ensure the system will be readily available for operation in case of an emergency. Any fire sprinkler service should be performed by an actively licensed fire sprinkler company in Abilene.

Abilene
Fire Sprinkler Services

Fire Sprinkler Costs
Obtain an Estimate
Bid for Service
Designing a System
Engineering
Installation
Maintenance
Service
Repair
Troubleshooting
Tests
Inspections
Annual Tests & Inspections
5 Year Tests & Inspections
Hydrostatic Tests
Flow Tests

NFPA 13
The NFPA standard and codes for the Installation of Sprinkler Systems

NFPA 14
The NFPA standard and codes for the Installation of Standpipe and Hose Systems

NFPA 15
The NFPA standard and codes for Water Spray Fixed Systems for Fire Protection

NFPA 16
The NFPA standard and codes for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems

NFPA 20
The NFPA standard and codes for the Installation of Stationary Pumps for Fire Protection

NFPA 25
The NFPA standard and codes for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems

Fire Sprinkler Systems

Fire sprinkler systems are designed to immediately initiate the flow of water, water mist, dry chemical, carbon dioxide (CO2) or similar gas discharge from sprinkler heads in effort to immediately extinguish and/or prevent the fire from spreading.